Transmission and Gear Oils

80W GL-5

80W, is special gear oil which is formulated with superior additives and mineral base oils derived from modern refining. It’s manual transmission fluid for

mechanical gearboxes and axles in cars and trucks as well as construction and agricultural machinery.

Technical Information

Test Method Typical Properties

Kinematic Viscosity (100°C), [cSt] ASTM D445 7 - 11

Viscosity Index, ASTM D2270 Min. 90

Flash Point °C, ASTM D92 Min. 190

Pour Point °C, ASTM D97 Max. -27

Certificates And Standards

API GL-5, David Brown S1.53.101(E), U.S. Steel 224, DIN 51517 Part 3, AGMA 9005-D94, ZF TE-ML

02A, 08, 16A, 17A, 19A

Sae 90 GL-1

They are gear oils produced for use in automotive gearboxes operating at normal load and speed, where there is no excessive pressure, and where

API GL-1 level oil is recommended. Use in gear cartridges, synchromesh gearboxes and differentials that do not require heavy load since they do not contain

extreme pressure additives.

Technical Information

Test Method Typical Properties

Kinematic Viscosity (100°C), [cSt] ASTM D445 13,5 - 18,5

Viscosity Index, ASTM D2270 Min. 92

Flash Point °C, ASTM D92 Min. 200

Pour Point °C, ASTM D97 Max. -18

Certificates And Standards

API GL-1

Sae 140 GL-1

They are gear oils produced for use in automotive gearboxes operating at normal load and speed, where there is no excessive pressure, and where

API GL-1 level oil is recommended. Use in gear cartridges, synchromesh gearboxes and differentials that do not require heavy load since they do not contain

extreme pressure additives.

Technical Information

Test Method Typical Properties

Kinematic Viscosity (100°C), [cSt] ASTM D445 24,0 - 32,5

Viscosity Index, ASTM D2270 Min. 92

Flash Point °C, ASTM D92 Min. 245

Pour Point °C, ASTM D97 Max. -10

Certificates And Standards

API GL-1

Sae 90 GL-4

90W, is special gear oil which is formulated with superior additives and mineral base oils derived from modern refining. It’s manual transmission fluid for mechanical gearboxes and axles in cars and trucks as well as construction and agricultural machinery.

Technical Information

Test Method Typical Properties

Kinematic Viscosity (100°C), [cSt] ASTM D445 13,5 - 18,5

Viscosity Index, ASTM D2270 Min. 92

Flash Point °C, ASTM D92 Min. 220

Pour Point °C, ASTM D97 Max. -18

Certificates And Standards

API GL-4, David Brown S1.53.101(E), U.S. Steel 224, DIN 51517 Part 3, AGMA

9005-D94ZF TE-ML 02A, 08, 16A, 17A, 19A

Sae 140 GL-4

Sae 140, is special gear oil which is formulated with superior additives and mineral base oils derived from modern refining. It’s manual transmission fluid

for mechanical gearboxes and axles in cars and trucks as well as construction and agricultural machinery.

Technical Information

Test Method Typical Properties

Kinematic Viscosity (100°C), [cSt] ASTM D445 24,0 - 32,5

Viscosity Index, ASTM D2270 Min. 92

Flash Point °C, ASTM D92 Min. 245

Pour Point °C, ASTM D97 Max. -10

Certificates And Standards

API GL-4, David Brown S1.53.101(E), U.S. Steel 224, DIN 51517 Part 3, AGMA 9005-D94ZF

TE-ML 02A, 08, 16A, 17A, 19A

80W-90 GL-5

80W/90, is a high-performance gear lubricant formulated from select base oils and an advanced additive system. It can be used for on highway light- and

heavy-duty trucks, buses, vans and cars. Provides increased protection and lubrication of the gearbox and the transaxle over a wide temperature range.

Technical Information

Test Method Typical Properties

Kinematic Viscosity (100°C), [cSt] ASTM D445 14,5 - 18,5

Viscosity Index, ASTM D2270 Min. 100

Flash Point °C, ASTM D92 Min. 220

Pour Point °C, ASTM D97 Max. -24

Certificates And Standards

API GL-5/GL-4, ZF TE-ML 05A, 7A, 12E, 16B, C and D, 17B, 19B, 21B, MAN 342M-1, MAN 342

M-2, Scania STO 1 Volvo 1273.12, DIN 51517 Part 3, U.S. Steel 224, MB 235.0 342 M-2

85W-140 GL-5

85W-140 is a high-performance gear lubricant formulated from select base oils and an advanced additive system. Thanks to its special formula provides effective

protection against corrosion may occur in severe operating conditions. Suitable for differentials and transaxles of vans, trucks, and buses when the manufacturer

recommends a GL-5 transmission oil with a viscosity of SAE 85W-140.

Technical Information

Test Method Typical Properties

Kinematic Viscosity (100°C), [cSt] ASTM D445 24,5

Viscosity Index, ASTM D2270 Min. 93

Flash Point °C, ASTM D92 Min. 240

Pour Point °C, ASTM D97 Max. -15

Certificates And Standards

API GL-5/GL-4, ZF TE-ML 05A, 7A, 12E, 16B, C and D, 17B, 19B, 21B, MAN 342M-1, MAN

342 M-2, Scania STO 1:0, Volvo 1273.12, DIN 51517 Part 3, U.S. Steel 224, AGMA 9005-D94

75W-80 SYN GL-5

75W-80 SYN, Formulated synthetic base oils with new additive technology give improved lubrication and longer life for equipment. Suitable for automotive

and heavy duty equipment transmission, axles, differentials where an EP (extreme pressure) lubricant is required when the manufacturer recommends a GL-5

transmission oil with a viscosity of SAE 75W-80.

Technical Information

Test Method Typical Properties

Kinematic Viscosity (100°C), [cSt] ASTM D445 8,4 - 13,5

Viscosity Index, ASTM D2270 Min. 130

Flash Point °C, ASTM D92 Min. 210

Pour Point °C, ASTM D97 Max. -39

Certificates And Standards

API GL-5/GL-4, ZF TE-ML 05A, 7A, 12E, 16B, C and D, 17B, 19B, 21 B, MAN 342M-1, MAN 342

M-2, Scania STO 1273.12, DlN 51517 Part 3, U.S. Steel 224, AGMA 9005-D94

75W-90 SYN GL-5

75W-90 SYN, Formulated synthetic base oils with new additive technology give improved lubrication and longer life for equipment. Suitable for automotive

and heavy duty equipment transmission, axles, differentials where an EP (extreme pressure) lubricant is required when the manufacturer recommends a GL-5

transmission oil with a viscosity of SAE 75W-90.

Technical Information

Test Method Typical Properties

Kinematic Viscosity (100°C), [cSt] ASTM D445 13,5 - 18,5

Viscosity Index, ASTM D2270 Min. 140

Flash Point °C, ASTM D92 Min. 200

Pour Point °C, ASTM D97 Max. -35

Certificates And Standards

API GL-5/GL-4, ZF TE-ML 05A, 7A, 12E, 16B, C and D, 17B, 19B, 21 B, MAN 342M-1, MAN 342 M-2,

Scania STO 1273.12, DlN 51517 Part 3, U.S. Steel 224, AGMA 9005-D94

Transmmission Series ATF DEXRON II

ATF DEXRON II, is high quality automatic transmission oil that is prepared by very well-refined base oils. GM Dexron II and Mercon are used in power

steering systems and automatic transmissions of vehicles, are required the level of performance. In addition, it is used in passenger cars, heavy vehicles steering

gears, automatic transmissions and the transmissions safely.

Technical Information

Test Method Typical Properties

Kinematic Viscosity (100°C), [cSt] ASTM D445 7,0 - 8,6

Viscosity Index, ASTM D2270 Min. 155

Flash Point °C, ASTM D92 Min. 180

Pour Point °C, ASTM D97 Max. -33

Certificates And Standards

GM Dexron IID, MB Page 236.7, 236.5, Caterpillar TO-2, MAN 339 VI, Zl, Allison

C-4, Renk, Hägglunds Denison HF-o, Voith G607

Transmmission Series ATF DEXRON III

ATF DEXRON Ill is formulated with high quality base oils and special additives to ensure the proper operation of the automatic transmission where Dexron (II

or III) or Mercon performance is required. It’s also suitable as Power Steering Fluid. Suitable for use in transmissions of trucks, buses and public works machineries

when a fluid type ALLISON C4 is required.

Technical Information

Test Method Typical Properties

Kinematic Viscosity (100°C), [cSt] ASTM D445 6,4 - 8,9

Viscosity Index, ASTM D2270 Min. 165

Flash Point °C, ASTM D92 Min. 195

Pour Point °C, ASTM D97 Max. -45

Certificates And Standards

GM Dexron IIIH, GM Dexron IIIM, GM Type A Suffix A, Ford Mercon, MB-Approval 236.1, 236.5,

Allison C-4, Voith H55.6335, MAN 339 TYP Z1, V1, ZF TE-ML-02F, 03D, 04D, 09, 11B, 14A, 17C, CAT TO-2, VOLVO 97341

Transmmission Series ATF CVT

MULTI CVT fluid is designed for today’s technologically advanced variable transmissions. It is formulated with full-synthetic, premium base oils, long-life

friction modifiers, unique anti-wear additives and shear stable viscosity modifiers that help prevent oil film breakdown. It is suitable for use in continuously

variable transmissions (CVT) of passenger cars.

Technical Information

Test Method Typical Properties

Kinematic Viscosity (100°C), [cSt] ASTM D445 7,7 - 5

Viscosity Index, ASTM D2270 Min. 165

Flash Point °C, ASTM D92 Min. 205

Pour Point °C, ASTM D97 Max. -53

Certificates And Standards

GM Saturn (DEX-CVT), Nissan (NS-2), Ford (CVT23), Honda (HMMF), Mercedes

Benz (236.20), Mitsubishi (CVTF-J1/SP-III), Hyundai and Kia (SP-III)

Truck Fluid 422

TRUCK 422, iyi rafine edilmiş mineral baz yağları ile ileri teknolojik katkı paketleri ile hazırlanmış çok amaçlı traktör transmisyon (UTTO) yağıdır. Tarım ve iş makinelerinin

güç aktarma ünitelerinin transmisyon sistemlerinde, yağ banyolu frenlerde, hidroliklerinde, kavrama dişlilerinde ve akslarda kullanılmak üzere özel olarak

geliştirilmiş çok amaçlı transmisyon yağıdır. Hareketli ekipmanların güç aktarma organlarında, tahrik akslarında, kavramalarda, PTO’larda ve hidrolik sistemlerde çok

iyi performans gösterir. Yüksek performanslı TRUCK 422 yağları dizel / benzin motor kullanım için uygundur (STOU).

Teknik Özellikler / Technical Information

Test Metot Tipik Özellikler / Test Method Typical Properties

Kinematic Viscosity (100°C), [cSt] ASTM D445 9,5 - 12,5

Viscosity Index, ASTM D2270 Min. 140

Flash Point °C, ASTM D92 Min. 210

Pour Point °C, ASTM D97 Max. -20

Certificates And Standards

API GL-4, CF/SF, SAE 80W, John Deere J20C, Massey Ferguson CMS M1143 and 1135, Case New

Holland MAT 3525 and 3526, Allison C4, ZF TE-ML 07B, 06D, 06C, 06B, Ford M2C 134D

Truck Fluid 426

TRUCK 426, is an extra high performance multipurpose tractor oil designed to meet or exceed transmission and hydraulic oil requirements. The advanced

technology in TRUCK 42-6 is designed to maximize the performance of agricultural and commercial tractors operating in a wide variety of environments and conditions.

Heavy-duty transmissions, differentials, final drives, hydraulic systems, power steering systems, wet brakes, PTOs and hydrostatic drives and recommended

in off-highway industries including: agriculture, construction, and quarrying.

Technical Information

Test Method Typical Properties

Kinematic Viscosity (100°C), [cSt] ASTM D445 9,7

Viscosity Index, ASTM D2270 Min. 145

Flash Point °C, ASTM D92 Min. 220

Pour Point °C, ASTM D97 Max. -36

Certificates And Standards

API GL-4, CF-4 -FORD-ESEN, M2C 86B-MASSEY, FERGUSON, CMS M1135,

VOLVO WB-101