Industrial Oils

GEAR BOXES 68 - 100 - 150 - 220 320 - 460 - 680

GEAR BOXES are high performance gear oils that are formulated for closed system gears, reinforced with extreme pressure (EP) and special additives, working

under extreme load and pressure. They show high performance for a long time without deteriorating their chemical and thermal stability at operating temperatures

between -15 °C and 120 °C (according to their viscosity values).

Technical Information

Test Method Typical Properties

Kinematic Viscosity (100°C), [cSt] ASTM D445 288 - 352

Viscosity Index, ASTM D2270 Min. 90

Flash Point °C, ASTM D92 Min. 210

Pour Point °C, ASTM D97 Max. -10

Certificates And Standards

David Brown S1.53.101 (E), USS 224, AGMA 9005-E02, DIN 51517 Part 3

TURBINE OILS Türbin Yağları 32 - 46 - 68 - 100

TURBINE OILS, is prepared by the mixture of high oxidation stability base oils and additives that protect against corrosion and oxidation. Vapor pressure and

temperature are high at modern turbines. Therefore, oils must be produced according to these difficult conditions to stand. Turbine Oils are produced to work under

these difficult conditions with base oils that have high oxidation stability to respond settled standards. They have additives against to corrosion and oxidation.

Turbine Oils can be used in vapor, water and gas turbines.

Technical Information

Test Method Typical Properties

Kinematic Viscosity (100°C), [cSt] ASTM D445 28,8 - 35,3

Total Acid Number, mgKOH/g Max. 0,5

Viscosity Index, ASTM D2270 Min. 95

Flash Point °C, ASTM D92 Min. 205

Pour Point °C, ASTM D97 Max. -25

Certificates And Standards

British Standard BS 489, Brown Boveri HT GD 90 117E, DIN 51515, General Electirc GEK-46506B, MIL-L-17672D,

General Electirc GEK-28143E, U.S. Steel 120, U.S. Steel 125, General Electirc GEK-141003H, Solar Turbines ES 9-224, Siemens TLV901304

COMPRESSOR OILS Kompresör Yağları 32 - 46 - 68 - 100

It has high protection to rusting. They can help reduce compressor component wear and thereby reduce maintenance requirements. Have been formulated

from high quality base oils and additives to provide in a variety of rotary screw compressors, screw type compressors and reciprocating air compressors.

Technical Information

Test Method Typical Properties

Kinematic Viscosity (100°C), [cSt] ASTM D445 28,8 - 35,2

Viscosity Index, ASTM D2270 Min. 95

Flash Point °C, ASTM D92 Min. 210

Pour Point °C, ASTM D97 Max. -25

Certificates And Standards

BS 489, Brown Boveri HT GD 90 117E, DIN 51515, Siemens TLV901304, MIL-L-17672D, General Electirc

GEK-32568F, U.S. Steel 120, U.S. Steel 125, Solar Turbines ES 9-224

SLIDE OIL Kızak Yağı 32 - 68 - 220

SLIDE OIL, is formulated with high quality base oils and quality tackifier additives to enhance the crucial property of adhesion and reduce stick–slip. Used for

lubrication of horizontal and vertical slides of all types of machine tools.

Technical Information

Test Method Typical Properties

Kinematic Viscosity (100°C), [cSt] ASTM D445 28,8 - 35,2

Viscosity Index, ASTM D2270 Min. 95

Flash Point °C, ASTM D92 Min. 200

Pour Point °C, ASTM D97 Max. -12

HEAT TRANSFER OIL Isı Transfer Yağı 32

HEAT TRANSFER OIL, has very good thermal stability which formulated with paraffinic base oil and best quality additives. It can be safely used in closed

system up 310 °C, in open system up 200 °C. At high temperatures the evaporation pressure of the oil is lower than the atmospheric pressure.

Technical Information

Test Method Typical Properties

Kinematic Viscosity (100°C), [cSt] ASTM D445 28,8 - 35,2

Viscosity Index, ASTM D2270 Min. 95

Flash Point °C, ASTM D92 Min. 215

Pour Point °C, ASTM D97 Max. -12

Certificates And Standards

DIN 51522

CUTTING OILS Kesme Yağları 32

CUTTING OI, is a qualified oil that is formulated with quality base oils obtained through modern refining processes. It exhibits extra resistance against high

pressure in cutting, broaching, penetrating, grinding and scratching processes through Sulphur chloride it contains.

Technical Information

Test Metot Tipik Özellikler / Test Method Typical Properties

Kinematic Viscosity (100°C), [cSt] ASTM D445 28,8 - 35,2

Viscosity Index, ASTM D2270 Min. 95

Flash Point °C, ASTM D92 Min. 205

Pour Point °C, ASTM D97 Max. -25

MOULD OIL Kalıp Yağı

MOULD OIL, is a qualified oil formulated from quality base oils obtained through modern refining processes. It has been developed for the construction industry

to prevent concrete from sticking to the moulds. It is recommended to be used in steel and wooden molds with its composition containing quality base oils and

special additives.

Technical Information

Test Method Typical Properties

Kinematic Viscosity (40°C), [cSt] ASTM D445 15

Kinematic Viscosity (100°C), [cSt] ASTM D445 3,5

Flash Point °C, ASTM D92 Min. 100

Pour Point °C, ASTM D97 Max. -6

LIGHT MACHINE İnce Makine Yağları

It is a special oil that is formulated by using well refined base oils. It has a wide range of applications in industry as a multi-purpose lubricator. It is successfully

used in applications such as systems requiring thin oil and in air conditioners.

Technical Information

Test Method Typical Properties

Kinematic Viscosity (100°C), [cSt] ASTM D445 3,3 - 4

Viscosity Index, ASTM D2270 Min. 95

Flash Point °C, ASTM D92 Min. 200

Pour Point °C, ASTM D97 Max. -12

BORON OlL Bor Yağı

Is multi-purpose metal working oil that is running in cutting and grinding of metals by mixing with water. It is used as lubricant and coolant in soft metals such

as steel and cast iron, light and heavy metal removal process. 95% water that ensure cleanliness of the bacteria-free, 5% boron by pouring oil over the water slowly

to obtain the ideal mixture. Do not pour water first on the the boron oil

Technical Information

Test Method Typical Properties

Color (Emulsion) - Milk White

PH (Emulsion) - 9,0 - 9,8

Corrosion Test - DIN 51360-2 - Pass

Certificates And Standards

DIN 51522